Just watched the latest video and saw you using VIM
I wondered what kind of configuration you where using, especially for the status line? Or, any other aspect you would like to share about it?
thx
Post
Tue Aug 05, 2014 6:15 pm
#2
Re: @JP: what VIM configration are you using?
agreed, the status line looks fancy. if you are able, please, give a glimpse at your vimrc. also, is that rdark?
cheers,
f.
cheers,
f.
Post
Tue Aug 05, 2014 9:09 pm
#3
Re: @JP: what VIM configration are you using?
I've been told by an unofficial source monokai, looks right
~Sly
~Sly
IVE BEEN OUT OF MY MIND A LONG TIME
Post
Wed Aug 06, 2014 2:20 am
#4
Re: @JP: what VIM configration are you using?
I was specifically interested in the nice status line. Thanks to google I already found some things. What I liked about the status line were those graphical like symbols.
My research led me to believe he's maybe using https://github.com/Lokaltog/powerline which is now a generic statusbar for vim, zsh, etc. which originated from https://github.com/Lokaltog/vim-powerline .
And then there's another spin off from vim-powerline (because it's development is basically discontinued) which is https://github.com/bling/vim-airline .
HTH
My research led me to believe he's maybe using https://github.com/Lokaltog/powerline which is now a generic statusbar for vim, zsh, etc. which originated from https://github.com/Lokaltog/vim-powerline .
And then there's another spin off from vim-powerline (because it's development is basically discontinued) which is https://github.com/bling/vim-airline .
HTH
Post
Wed Aug 06, 2014 1:34 pm
#5
Droid Sans Mono 10
Custom Theme:
Note the colors only work in gvim, I copied this and modified from another scheme, so the command-line colors aren't the same. I always use gvim
Powerline : https://github.com/Lokaltog/vim-powerline with modified color scheme to match the one given above
Re: @JP: what VIM configration are you using?
I use:drLight wrote:Just watched the latest video and saw you using VIM
I wondered what kind of configuration you where using, especially for the status line? Or, any other aspect you would like to share about it?
thx
Droid Sans Mono 10
Custom Theme:
Code: Select all
" Maintainer: Josh Parnell
" Version: 1.3
" Last Change: 3.23.2014
set background=dark
hi clear
if exists("syntax_on")
syntax reset
endif
let colors_name = "space2"
" Vim >= 7.0 specific colors
if version >= 700
hi CursorLine guibg=#151515 gui=bold ctermbg=234
hi CursorColumn guibg=#151515 gui=bold ctermbg=234
hi MatchParen guifg=#d0ffc0 guibg=#151515 gui=bold ctermfg=157 ctermbg=237 cterm=bold
hi Pmenu guifg=#ffffff guibg=#151515 gui=bold ctermfg=255 ctermbg=238
hi PmenuSel guifg=#000000 guibg=#b1d631 gui=bold ctermfg=0 ctermbg=148
endif
" General colors
hi Cursor gui=bold guifg=#151515 guibg=#ff5030 ctermbg=241
hi Normal gui=bold guifg=#e2e2e5 guibg=#151515 ctermfg=253 ctermbg=234
hi NonText gui=bold guifg=#808080 guibg=#151515 ctermfg=244 ctermbg=235
hi LineNr gui=bold guifg=#383838 guibg=#151515 ctermfg=244 ctermbg=232
hi StatusLine gui=bold guifg=#d3d3d5 guibg=#303030 ctermfg=253 ctermbg=238
hi StatusLineNC gui=bold guifg=#939395 guibg=#303030 ctermfg=246 ctermbg=238
hi VertSplit gui=bold guifg=#444444 guibg=#303030 ctermfg=238 ctermbg=238
hi Folded gui=bold guibg=#384048 guifg=#a0a8b0 ctermbg=4 ctermfg=248
hi Title gui=bold guifg=#f6f3e8 guibg=NONE ctermfg=254 cterm=bold
hi Visual gui=bold guifg=#faf4c6 guibg=#3c414c ctermfg=254 ctermbg=4
hi SpecialKey gui=bold guifg=#808080 guibg=#343434 ctermfg=244 ctermbg=236
let c1 = '#2090d0'
let c2 = '#606060'
let c3 = '#ff5030'
let c4 = c1
let c5 = '#90c010'
" Syntax highlighting
exe "hi Boolean gui=bold ctermfg=148 guifg=" . c1
exe "hi Identifier gui=bold ctermfg=148 guifg=" . c1
exe "hi Special gui=bold ctermfg=208 guifg=" . c1
exe "hi String gui=bold ctermfg=148 guifg=" . c2
exe "hi Constant gui=bold ctermfg=208 guifg=" . c2
exe "hi Number gui=bold ctermfg=208 guifg=" . c2
exe "hi Statement gui=bold ctermfg=103 guifg=" . c3
exe "hi PreProc gui=bold ctermfg=230 guifg=" . c3
exe "hi Type gui=bold ctermfg=103 guifg=" . c4
exe "hi Function gui=bold ctermfg=255 guifg=" . c5
exe "hi Keyword gui=bold ctermfg=208 guifg=" . c5
exe "hi Todo gui=bold,underline guibg=#151515 guifg=#ff0000"
exe "hi Comment gui=bold ctermfg=244 guifg=#505050"
Powerline : https://github.com/Lokaltog/vim-powerline with modified color scheme to match the one given above
“Whether you think you can, or you think you can't--you're right.” ~ Henry Ford
Post
Sat Aug 09, 2014 12:13 am
#6
Re: @JP: what VIM configration are you using?
I have taken this and called it Parnellline.vim great stuff
~Sly
~Sly
IVE BEEN OUT OF MY MIND A LONG TIME
Post
Tue Aug 12, 2014 9:57 pm
#7
Re: @JP: what VIM configration are you using?
Nice - I need to update my vim setup anyway
procedurally generated comment
Post
Tue Oct 07, 2014 4:00 pm
#8
You have me looking for beauty in code again Josh
Hey Everyone,
I was wondering what fonts and widgets Josh uses with Awesome wm and what other plugins he uses for vim (btw I prefer airline to powerline )
~Sly
I was wondering what fonts and widgets Josh uses with Awesome wm and what other plugins he uses for vim (btw I prefer airline to powerline )
~Sly
IVE BEEN OUT OF MY MIND A LONG TIME
Post
Tue Oct 07, 2014 4:21 pm
#9
Re: You have me looking for beauty in code again Josh
THIS POST WAS NOT MADE FOR THIS THREAD
Last edited by Katawa on Tue Oct 07, 2014 11:34 pm, edited 1 time in total.
woops, my bad, everything & anything actually means specific and conformed
Post
Tue Oct 07, 2014 4:26 pm
#10
Re: You have me looking for beauty in code again Josh
Katawa wrote:Wait a minute... This is clickbait!
Have a question? Send me a PM! || I have a Patreon page up for REKT now! || People talking in IRC over the past two hours:
Post
Tue Oct 07, 2014 4:30 pm
#12
Re: You have me looking for beauty in code again Josh
It was mostly clickbait for Josh, but if everyone clicks it I guess that works too
~Sly
~Sly
IVE BEEN OUT OF MY MIND A LONG TIME
Post
Tue Oct 07, 2014 5:38 pm
#13
Re: @JP: what VIM configuration are you using?
Merge!
- The Snark Knight
"Look upward, and share the wonders I've seen."
"Look upward, and share the wonders I've seen."
Post
Tue Oct 07, 2014 5:41 pm
#14
Re: @JP: what VIM configuration are you using?
This needs to be a Shout. Victor may or may not agree.Just_Ice_au wrote:Merge!
Have a question? Send me a PM! || I have a Patreon page up for REKT now! || People talking in IRC over the past two hours:
Post
Thu Oct 09, 2014 7:05 am
#15
Re: @JP: what VIM configuration are you using?
For those who would like to prepare self for LTSL coding I just created Docker image with vim and vim-airline installed.
I doesn't use vim-powerline because it requires additional Python package that will increase image size.
Do following steps to try it:
To start container created before (for example after computer restart) run:
To enter container you have exited before run:
I didn't install font and theme mentioned by Josh but it looks similar.
Probably we should create Docker image for LTSL specifically (fonts+theme+syntax highlighting).
PS. Image now works not very correct (for example Ctrl+P combination doesn't work right now). I'm still working on configuration and if anyone will have some ideas or patches don't hesitate to send them to me.
I doesn't use vim-powerline because it requires additional Python package that will increase image size.
Do following steps to try it:
- Install Docker:
Code: Select all
sudo apt-get install docker.io
- Pull Docker image and run a container: where <path_to_ltsl_scripts> is a path to the folder with LTSL scripts or folder with files you would like to edit
Code: Select all
sudo docker run -i -t --name my-vim-with-plugins -v <path_to_ltsl_scripts>:/home/dev/src haron/vim-with-plugins
Code: Select all
sudo docker run -i -t --name my-vim-with-plugins -v <path_to_ltsl_scripts>:/home/dev/src haron/vim-with-plugins /bin/bash
Code: Select all
sudo docker start my-vim-with-plugins
Code: Select all
sudo docker attach my-vim-with-plugins
Probably we should create Docker image for LTSL specifically (fonts+theme+syntax highlighting).
PS. Image now works not very correct (for example Ctrl+P combination doesn't work right now). I'm still working on configuration and if anyone will have some ideas or patches don't hesitate to send them to me.